The Finnish Meteorological Institute is a leading expert in meteorology, air quality, climate change, earth observation, marine and arctic research areas.
FMI's researchers publish about 300 peer-reviewed articles annually.
In Science News we publish current information about FMI's studies on the weather, the sea and the climate.
Air pollutants have been associated with environmental, economic and public health impacts. Because of air quality management relies on estimated pollutant concentrations from air quality models, it is of great importance to have them properly evaluated.
An evaluation of the Comprehensive Air Quality Model was done with extensions (CAMx) using co‑located radiometric and lidar data from Thessaloniki, Greece database. To obtain the same output products as of the model research used PM2.5 and PM2. 5−10 concentration profiles retrieved by the Lidar‑Radiometer Inversion Code (LIRIC). Such algorithm can combine sunphotometric and remote‑sensing measurements form a lidar.
The CAMx model and the LIRIC algorithm results were compared in terms of mean mass concentration profiles, center of mass and integrated mass concentration in the boundary layer and the free troposphere. The mean mass concentration comparison resulted in profiles within the same order of magnitude and similar vertical structure for the PM2. 5 particles. The mean centers of mass values are also close, with a mean bias of 0.57 km.
On the opposite side, there are larger differences for the PM2. 5−10 mode, both in the boundary layer and in the free troposphere. In order to grasp the reasons behind the discrepancies, we investigate the effect of aerosol sources that are not properly included in the model's emission inventory and in the boundary conditions such as the wildfires and the desert dust component. The identification of the cases that are affected by wildfires is performed using wind backward trajectories from the Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model in conjunction with satellite fire pixel data from MODerate-resolution Imaging Spectroradiometer (MODIS) Terra and Aqua global monthly fire location product MCD14ML. By removing those cases the correlation coefficient improves from 0.69 to 0.87 for the PM2. 5 integrated mass in the boundary layer and from 0.72 to 0.89 in the free troposphere. The PM2.5 center of mass fractional bias also decreases to 0.38 km.
Concerning the analysis of the desert dust component, the simulations from the Dust Regional Atmospheric Model (BSC-DREAM8b) were deployed. When only the Saharan dust cases are taken into account, BSC-DREAM8b generally outperforms CAMx when compared with LIRIC, achieving a correlation of 0.91 and a mean bias of −29.1 % for the integrated mass in the free troposphere and a correlation of 0.57 for the center of mass. CAMx, on the other hand, underestimates the integrated mass in the free troposphere. Consequently, the accuracy of CAMx is limited concerning the transported Saharan dust cases. "We concluded that the performance of CAMx appears to be best for the PM2.5 particles, both in the boundary layer and in the free troposphere. Sources of particles not properly taken into account by the model are confirmed to negatively affect its performance, especially for the PM2. 5−10 particles", says Maria Filioglous from FMI.
Maria Filioglou, tel. +358 50 463 9930, email@example.com
Siomos, N., Balis, D. S., Poupkou, A., Liora, N., Dimopoulos, S., Melas, D., Giannakaki, E., Filioglou, M., Basart, S., and Chaikovsky, A.: Investigating the quality of modeled aerosol profiles based on combined lidar and sunphotometer data, Atmos. Chem. Phys., 17, 7003-7023, https://doi.org/10.5194/acp-17-7003-2017, 2017.
FMI researchers produce some 300 publications annually, the majority of them in international scientific journals. Research results are also published in FMI´ss own publications series. FMI`s own series are:
* FMI Contributions: high-quality peer-reviewed research results, mainly doctoral dissertations
* FMI Reports: current research results mainly for customers and other stakeholders
All publications from 2016 onwards can be found on Helda.